The galvanized steel tubes are resistant to wheather and humidity, wich favors its use in plumbing and exterior constructions.
We produce galvanized steel tubes (quality DX51D with Z100 covering) according to the European standard EN 10305.
We produce square sections, rectangular sections and circular sections.
SQUARE GALVANIZED TUBES |
Dimensions* (mm) |
Thickness* (mm) |
Lenght* (m) |
Weight of package (kg) |
20×20 |
1,5 |
6 |
900 – 1500 |
25×25 |
1,5 |
30×30 |
1,5 |
35×35 |
1,5 |
40×40 |
1,5 – 2 |
50×50 |
1,5 – 2 |
60×60 |
1,5 – 2 |
80×80 |
2 |
100×100 |
2 |
* On request, we manufacture tubes with other sizes and thicknesses. Consult our commercial department. |
RECTANGULAR GALVANIZED TUBES |
Dimensions* (mm) |
Thickness* (mm) |
Lenght* (m) |
Weight of package (kg) |
30×20 |
1,5 |
6 |
900 – 1500 |
40×20 |
1,5 |
40×30 |
1,5 |
60×40 |
1,5 – 2 |
80×40 |
1,5 – 2 |
100×40 |
2 |
100×50 |
2 |
* On request, we manufacture tubes with other sizes and thicknesses. Consult our commercial department. |
CIRCULAR GALVANIZED TUBES |
Dimensions* (mm) |
Thickness* (mm) |
Lenght* (m) |
Weight of package (kg) |
Ø30 |
1,5 |
6 |
900 – 1200 |
Ø40 |
Ø50 |
Ø60 |
Ø60 |
* On request, we manufacture tubes with other sizes and thicknesses. Consult our commercial department. |
According to the European standard EN 10346, the mechanical properties of the steel we use in our galvanized tubes, for thickneeses less than or equal to 2 mm., are the following:
|
DX51D (Z100) |
Yield limit [fy] – N/mm² |
140 |
Tensile strength [fs] – N/mm² |
270-500 |
Minimum elongation [A80] – % |
22 |
Our galvanized tubes are produced under the strictest quality controls, according to the requirements of the European standard EN 10305.